Keep your bounce rate under 3%. Verify your email list with catch-all email verifier Giggal.ai

Cold email deliverability checklist Cold email deliverability: the 2026 checklist.

How to improve email deliverability for cold email, step by step: 38 checks across domains, authentication, inboxes, warmup, volume, list quality and copy, then how to find and fix a sudden drop. Written by the team that sets up cold email inboxes every day.

By Ali Tahir Sajjad, Chief Operating Officer · Published November 20, 2026

The short answer

Good cold email deliverability comes from seven habits: send from separate domains, authenticate each one with SPF, DKIM and DMARC, use real Google Workspace or Microsoft 365 inboxes, warm them up for two to three weeks, keep each inbox to 20–40 emails a day, send only to verified addresses, and write short plain-text emails with no links in the first one. Then check your numbers every week.

Disclosure: PureMail sells the inboxes in step three. Everything else on this page applies whoever you buy from.

The basics

What is email deliverability, and why it matters.

What is email delivery?

The receiving server accepted your email. It did not bounce. Where it went next, inbox or spam, is not part of delivery.

delivery rate = accepted ÷ sent

What is email deliverability?

Your email reached the inbox, where the person will see it, not spam or promotions. This is the number that decides your replies.

deliverability rate = in the inbox ÷ sent

A campaign can have a 99% delivery rate and still fail, because half of those “delivered” emails sit in spam. That is why cold email deliverability is measured with inbox placement tests and reply rates, not with your sequencer’s “delivered” count.

Why email deliverability is important

An email in spam gets no reply. Say you send 1,000 cold emails a day. At 60% inbox placement, 600 people see your email. At 90%, 900 do. Same list, same copy, same cost, and 50% more chances of a reply. If you want to increase email deliverability, start there: it is usually the cheapest way to get more meetings from outbound, and it is also how you improve email delivery, because the same habits cut bounces.

Cold email deliverability is not email marketing deliverability

Deliverability advice for email marketing assumes people signed up for your newsletter and you send to all of them from one platform. Cold email is different: nobody asked for it, so the volume has to be spread across many inboxes and domains, each sending a few dozen emails a day, and every email has to look like it came from one person. Most email deliverability tips you read online are written for email marketing. This email deliverability guide is only about cold email deliverability, mainly to B2B buyers in the United States. Most cold email best practices you read are about copy; deliverability comes first, because copy nobody sees cannot work. Email deliverability optimization for cold email is less about the platform and more about spreading volume, clean lists and plain copy.

Benchmarks

Cold email deliverability benchmarks for 2026.

The five numbers to watch, what good looks like, and what the latest large studies found. Each figure links to its source.

MetricAim forWhat the data showsSource
Inbox placement90%+ in your own placement testsAverage 87.2%: Gmail 89.8%, Microsoft 77.4%Validity 2026, via Snov.io
Bounce rateUnder 2%Custom domains 1.15%, free email domains 3.87% (10.1M emails)Snov.io, May 2026
Spam complaint rateUnder 0.1%Never reach 0.3%: above it, Gmail offers no mitigationGoogle sender guidelines
Reply rateTrack replies, not opens7.4% without open tracking vs 4.4% with itHunter, State of Email Outreach 2026
Delivery rate98%+ acceptedBelow that, look at bounces before anything elseOur guidance

Study figures are observational: they show what senders in each dataset saw, not what caused it. Your own placement tests and reply rates are the numbers that count.

How to improve cold email deliverability

The email deliverability checklist: 38 checks.

Go through it in order before you launch, and again whenever replies drop. These are the cold email deliverability best practices we set up on every order, plus the ones only you can do. Use it as your cold email deliverability checklist for every new domain.

Step 1

Sending domains

Protect your main domain first. Everything else is easier to replace.

  • Never send cold email from your main domainBuy separate sending domains that look like your brand, such as getacme.com or tryacme.com. If one gets a bad reputation, your company email keeps working.
  • Separate domains, not subdomainsA subdomain such as mail.acme.com still carries your main domain’s name, so a problem on it can reach your company email. Lookalike domains keep the two apart.
  • Use .com domainsCheap new endings like .xyz or .top are used a lot by spammers, and many filters trust them less.
  • Point every sending domain at your websiteA prospect who types the domain in should land on your real site, not an empty page.
  • Two inboxes per domain, five at mostSpread volume across domains, so a problem on one domain only touches a few inboxes.

Step 2

Authentication (SPF, DKIM, DMARC, MX)

These DNS records prove the email really comes from you. Without them, Gmail and Outlook reject or junk your mail.

  • One SPF record per domainIt lists the services allowed to send for the domain. Two SPF records on one domain break both, and so do more than 10 DNS lookups inside one record. SPF, DKIM and DMARC setup →
  • DKIM signing turned onPublish a 2048-bit DKIM key, then switch signing on in Google Admin or Microsoft 365. Publishing the key alone is not enough. What is DKIM →
  • A DMARC record, starting at p=noneIt tells inboxes what to do when SPF or DKIM fails, and sends you reports. The From domain must align with SPF or DKIM. Move to p=quarantine once the reports are clean. What is DMARC →
  • An MX record, so replies arriveAn inbox that cannot receive mail looks fake to filters, and you lose the replies you are paying for. What is an MX record →
  • Check the headers of a test emailSend one email to a Gmail address, open “Show original” and look for spf=pass, dkim=pass and dmarc=pass. How to read an email header →

Step 3

Mailboxes

Where your email is sent from decides which reputation it starts with.

  • Use real Google Workspace or Microsoft 365 inboxesThey send through Google’s or Microsoft’s own servers. Cheap SMTP mailboxes share IP addresses with other senders, and their reputation. What a shared IP means →
  • Match the provider to your listProspects on Gmail hear from Google inboxes; prospects on Outlook hear from Microsoft inboxes. See the section on Google vs Outlook below.
  • A real name, photo and signature on every inboxjane@getacme.com with a face and a title gets more replies than sales@, and replies are a strong positive signal.
  • Someone reads the repliesAnswer replies and remove people who ask. Ignored replies turn into spam reports.

Step 4

Domain warming and inbox rotation

A new inbox has no history. Warmup builds one before you ask it to send cold email.

  • Warm up every new inbox for two to three weeksWarmup sends and answers a few emails a day between real inboxes, so the inbox builds a normal history before the first cold email. How email warmup works →
  • Ramp up slowlyAbout 10 cold emails a day in week three, then 20 to 40 a day from week four. Never jump straight to full volume.
  • Keep warmup running after launchLeave it on at a low level. It keeps positive signals coming in while the cold emails go out.
  • Rotate inboxes in every campaignInbox rotation spreads one campaign across many inboxes and domains, so no single inbox carries the load and a flagged inbox hurts only a small share.

Step 5

Daily volume

Volume per inbox is the setting most teams get wrong, because it is the easiest to push.

  • 20 to 40 cold emails a day per inboxAround 30 is a safe default once an inbox is warmed up. Google and Microsoft allow far more, but their limits are not a target.
  • Need more volume? Add inboxes, not emails per inboxSending 1,000 cold emails a day takes about 34 inboxes on 17 domains. The cold email calculator works it out for any number. Cold email calculator →
  • Send on weekdays, in the recipient’s working hoursWith random gaps of 5 to 15 minutes between emails from each inbox. Bursts of mail at 3 a.m. do not look like a person.
  • Keep 10 to 20% spare inboxes warmed upWhen an inbox gets flagged, you swap in a warm one the same day instead of waiting three weeks.

Step 6

List quality

A bad list ruins good infrastructure faster than anything else on this checklist.

  • Verify every address before you sendKeep your bounce rate under 2%. Every hard bounce tells Gmail and Outlook you do not know who you are emailing. Email verification tools →
  • Handle catch-all addresses with careA catch-all domain accepts every address, so a verifier cannot tell if the person exists. Send to these in small batches, or leave them out.
  • Leave role-based addresses out of first emailsinfo@, sales@ and support@ go to shared inboxes and filters, bounce more and report more spam.
  • Re-verify any list older than 90 daysPeople change jobs every month, and their old addresses turn into hard bounces or spam traps. What is a spam trap →
  • Target tightlyA small list of people who need your offer beats a large list that does not. More on this below.

Step 7

Copy

Filters read your email too. Write it like one person writing to another.

  • Plain text, no images, no attachmentsA cold email should look like a normal email from a colleague, not a newsletter.
  • No links in the first emailLinks, especially shortened or tracked ones, are a common reason a first email from a new sender lands in spam. In follow-ups, use one plain link at most, on a custom tracking domain if you track clicks.
  • Turn off open trackingIt adds an invisible image to every email, and Apple Mail opens emails on its own, so open rates are not reliable anyway. In Hunter’s 2026 data, sequences without open tracking got 7.4% replies against 4.4% with it. Track replies instead.
  • Short, with one questionUnder about 100 words. Ask one easy question that a reply can answer.
  • Vary the wordingThousands of identical emails look like bulk mail. Spintax changes a few words in each one. What is spintax →
  • An easy way to opt out, and honour itA short line such as “Not the right person? Just tell me and I will not write again.” Remove anyone who asks, the same day. The List-Unsubscribe header →

Step 8

Monitoring

Deliverability changes week to week. Check these numbers on a schedule, not only when replies stop.

  • Watch the reply rate per inbox, every weekA falling reply rate on one inbox or domain is the first sign of a problem, often weeks before anything else.
  • Add every domain to Google Postmaster ToolsIt shows your spam rate at Gmail and a Compliance status (Pass or Needs work). Keep spam under 0.1%, never 0.3%. Google removed the old domain reputation dashboard in 2025, and a low-volume cold domain often shows “No data”, which is normal. What is domain reputation →
  • Run an inbox placement test before each new campaignIt sends your email to test inboxes at Gmail, Outlook and others, and shows how many land in the inbox, spam or promotions. Deliverability testing tools →
  • Check your domains against blacklists once a monthA free blacklist check takes a minute. Being listed explains a sudden drop.
  • Pause an inbox when bounces pass 2% or replies stopKeep its warmup running for a week or two, then bring it back slowly.

Best practices

Domain warming and inbox rotation, week by week.

Every new inbox follows the same ramp. Warmup runs the whole time; cold email starts in week three.

Cold emails per inbox, per day

Cold emailWarm-up (always on)

Week 1

Warm-up only

Week 2

Warm-up only

Week 3

Start campaigns

Week 4

Full volume

Week 5+

Full volume

Domain warming means letting a new domain and its inboxes build a normal history before they send cold email. In practice you warm up the inboxes, and the domain’s reputation grows with them. Two to three weeks is enough for most domains. Buying “aged” domains does not skip this step: an old domain with no sending history is still new to Gmail and Outlook.

Inbox rotation means one campaign sends from many inboxes in turn. Every major sequencer does it. Ten inboxes sending 30 emails each look normal; one inbox sending 300 does not. Rotation also limits the damage when something goes wrong: if one inbox is flagged, the campaign keeps running on the other nine while you replace it.

This is cold email deliverability at scale. Teams sending 10,000 emails a day are not doing anything special per inbox. They run hundreds of inboxes at 30 a day each, across a few hundred domains, and replace the ones that wear out.

Lead data

Small engaged list vs large unengaged list: which one helps improve cold email deliverability?

The small engaged list wins, for deliverability and for meetings. Inbox providers watch what people do with your email. If 1,000 well-chosen prospects open, reply and never report you, Gmail and Outlook learn your emails are wanted. If 10,000 loosely chosen prospects ignore, delete and report you, they learn the opposite, and that reputation follows your domain into the next campaign.

So the order is: decide exactly who needs your offer, build the list from them only, verify it, and grow it only as fast as you can keep it that good. A bigger list is not a fix for a weak offer. It just spreads the damage across more domains.

Why verification misses bad cold email addresses

An email verifier asks the recipient’s mail server whether an address exists, without sending an email. Most servers answer honestly. Catch-all servers do not: they say yes to every address, real or not, so the verifier can only mark the address “unknown” or “risky”. Some servers also block verifiers or answer slowly. Those addresses are where your bounces come from after a “clean” verification. Send to them in small batches from a few inboxes, watch the bounces, and drop the batch if they climb.

Role-based addresses

info@, sales@, support@ and hello@ are read by teams, filtered hard and often used as spam traps. They bounce more and report spam more. Remove them from first-touch cold email, and reach a named person instead.

Inbox providers

Google or Outlook: which has better cold email deliverability?

Neither, everywhere. Each provider filters its own users, so send to each group of prospects from the inboxes their provider knows best.

Your prospects useTypical listsSend from
Gmail / Google WorkspaceStartups, SaaS, agencies, e-commerce, techGoogle Workspace inboxes
Outlook / Microsoft 365Enterprise, finance, healthcare, manufacturing, public sectorMicrosoft 365 inboxes
A mixMost B2B listsBoth. Split the list by the prospect’s MX record and send each half from the matching inboxes.

You can tell which provider a prospect’s company uses from its MX record: google.com means Google Workspace, outlook.com or protection.outlook.com means Microsoft 365. Most sequencers and data tools show this, and some route each prospect to a matching inbox for you. For B2B cold email deliverability, this one change often lifts reply rates more than any copy test.

Cold email deliverability on Outlook and Microsoft 365

Outlook is the harder inbox. Validity’s 2026 benchmark, quoted by Snov.io, puts average inbox placement at 77.4% for Microsoft against 89.8% for Gmail. Business prospects on Microsoft 365 sit behind Microsoft’s own filtering, often with a security gateway on top, and new senders are trusted slowly. What helps most:

  • Send Outlook prospects from Microsoft 365 inboxes, warmed up for three to four weeks, not two.
  • Keep the first email plain text, with no link, no image and no tracking. Microsoft filters weigh these more than Gmail does.
  • Go slower on new Microsoft 365 tenants: Microsoft limits a new tenant to a share of its external-recipient cap for its first 60 days.
  • Test placement into an Outlook seed inbox before each campaign, not only Gmail.

United States

The rules your cold email has to meet.

Inbox deliverability in the United States is set by three mailbox providers and one law. The provider rules only bind high-volume senders to personal mailboxes, but they describe exactly what every filter checks. Meet all of them.

Gmail and Yahoo, since February 2024

For mail to personal Gmail addresses. Google says the guidelines do not apply to mail sent to Google Workspace accounts, which filter on the same signals anyway.

  • SPF or DKIM on every sending domain; both, plus DMARC, from 5,000 emails a day
  • The From domain aligned with SPF or DKIM
  • A spam rate under 0.3% in Postmaster Tools, ideally under 0.1%
  • One-click unsubscribe on marketing mail sent in bulk
  • Valid forward and reverse DNS, and TLS
  • Since November 2025, failures get temporary (4.7.x) or permanent (5.7.x) rejections

Sources: Google’s email sender guidelines and its FAQ

Outlook.com, since May 2025

  • SPF, DKIM and DMARC (at least p=none) for domains sending over 5,000 emails a day to Outlook.com, Hotmail and Live addresses
  • DMARC aligned with SPF or DKIM
  • Mail that fails goes to Junk first; Microsoft says it will later be rejected with 550 5.7.515, date to be announced
  • It covers consumer Outlook addresses, not Microsoft 365 business mailboxes, which filter with their own rules

Source: Microsoft’s announcement

CAN-SPAM, the US law

B2B cold email is legal in the United States if it follows the CAN-SPAM Act: honest From and subject lines, a valid physical postal address in every email, a clear way to opt out, and every opt-out honoured within 10 business days. Compliance is not a deliverability trick, but the same habits (honest copy, easy opt-out, fast removal) are what keep spam reports down. Read the FTC’s CAN-SPAM guide.

Setup budget

What a cold email deliverability setup costs.

Inboxes and domains at four daily volumes, at 30 cold emails a day per warmed inbox and two inboxes per domain. Inbox prices are PureMail’s, with DNS and setup included; domains at about $12 a year each.

Cold emails a dayInboxesDomainsInboxes a monthDomains a year
300105$33$3.30 each~$60
1,0003417$105.40$3.10 each~$204
2,5008442$260.40$3.10 each~$504
5,00016784$484.30$2.90 each~$1,008

Plus your sequencer (warmup is built into the major ones), lead data and email verification, which are priced by plan. Add 10–20% spare inboxes if you want same-day replacements. For any other volume, use the cold email calculator.

The infrastructure is the small part of a cold email budget. Sending 1,000 cold emails a day costs about $105 a month in inboxes, and the domains about $204 a year. Where teams overspend is on fixing deliverability after the fact: weeks of lost campaigns, new domains and fresh warmup. Setting it up right the first time is cheaper, and it is the most reliable way to improve email deliverability before you send a single email. If you want to compare providers, see the best cold email infrastructure providers and the cheapest cold email inboxes.

Work out your own setup

Enter the cold emails you want to send each day. The calculator gives the inboxes, domains, monthly cost and ramp-up for your number.

How many emails should each inbox send a day?

Sending less from each inbox is safer for deliverability, so the same daily goal is split across more inboxes.

Inboxes per domain

We recommend 2 per domain, and never more than 5. Fewer per domain spreads your risk across more domains.

You need

34

inboxes

17

domains

1,000 emails a day ÷ 30 per inbox = 34 inboxes34 inboxes ÷ 2 per domain = 17 domains

Sending capacity
1,020 emails / day
PureMail plan
Business · $3.10 per inbox
Inboxes per month
$105.40
Cost per 1,000 emails sent
$4.70
Domains (from your registrar)
17 × about $10–15 a year

Ramp-up plan

Week 1–2: warm-up only. Week 3: about 340 a day. Week 4 onwards: up to 1,020 a day.

Problems and solutions

Cold email deliverability problems, and how to fix them.

Find the row that matches what you see. Each one names the usual cause and the fix.

What you seeUsual causeFix
Replies stop on every inbox at onceA DNS change broke SPF, DKIM or DMARC, your domains were blacklisted, or one campaign drew a burst of spam reports.Check a test email’s headers for three passes, run a blacklist check and look at the spam rate in Postmaster Tools. Pause the campaign you launched last.
Gmail bounces with 4.7.27, 4.7.30, 4.7.31 or 4.7.32Gmail’s sender rules, enforced harder since November 2025: SPF failed (27), DKIM failed (30), DMARC record missing (31) or the From domain is not aligned (32). 5.7.x codes are the permanent versions.Fix the record the code names, send a test email and check the headers for three passes before you resume.
Outlook.com bounces with 550 5.7.515The sending domain does not meet Microsoft’s authentication level for Outlook.com, Hotmail and Live addresses.Publish SPF, DKIM and DMARC (at least p=none) and make sure DMARC aligns.
One domain drops, the others are fineThat domain’s reputation fell, usually from a bad list or too much volume on its inboxes.Pause cold email on that domain and keep warmup on. If it has not recovered in two weeks, replace its inboxes with spares.
Bounces jump above 2%An old or unverified list, or too many catch-all addresses.Stop sending, re-verify the list and take out catch-alls and role-based addresses.
Gmail prospects reply, Outlook prospects go quiet (or the other way)One provider is filtering you harder than the other.Split the list by provider and send Outlook prospects from Microsoft 365 inboxes, Gmail prospects from Google Workspace inboxes.
A new campaign lands in spam, older ones do notThe copy: a link, an image, a tracking pixel, or wording that looks like bulk mail.Run a placement test on a plain-text version with no links and no tracking. If it lands in the inbox, the copy was the problem.
A slow decline over several weeksToo many emails per inbox, warmup switched off, or the same copy sent for months.Drop to 20–30 a day per inbox, turn warmup back on, rewrite the sequence and add inboxes if you need the volume.

What ruins cold email deliverability the fastest

  1. 1Sending to a bad listHard bounces and spam traps tell every inbox provider you bought or scraped your data. One campaign at 10% bounces can undo months of warmup.
  2. 2Spam reportsGmail’s line is 0.3% of messages. That is 3 reports per 1,000 emails, which an untargeted list reaches in a day.
  3. 3Full volume on a new inboxA day-old inbox that sends 100 cold emails looks exactly like a spammer’s new account, because that is what spammers do.
  4. 4Broken authenticationA second SPF record or DKIM signing switched off means every email fails a check Gmail and Outlook now require.
  5. 5Links and tracking in the first emailTracked and shortened links are common in spam, so filters weigh them heavily in a message from a sender they do not know.

How to diagnose cold email deliverability problems

  1. 1Find where it failsAll inboxes or some? One domain or all? Gmail recipients, Outlook recipients or both? The pattern points to the cause.
  2. 2Check authenticationSend a test email to Gmail and look for spf=pass, dkim=pass and dmarc=pass in the headers.
  3. 3Check blacklistsRun each sending domain through a blacklist checker.
  4. 4Check spam complaintsLook at the spam rate for each domain in Google Postmaster Tools.
  5. 5Test the copyRun an inbox placement test on your current email and on a plain-text version with no links. Compare the two.
  6. 6Check the listLook at the bounce rate, the share of catch-all addresses and how old the data is.

How do I fix cold email deliverability once it has dropped?

Stop making it worse first: pause cold email on the affected inboxes, but keep their warmup running. Fix the cause you found above. Then bring the inboxes back at 10 a day and ramp up over two weeks, watching reply and bounce rates. If an inbox or domain has not recovered after two to three weeks, retire it and send from fresh, warmed-up spares. That is usually faster than nursing a burned domain back.

Testing

Cold email deliverability tools and tests.

Three kinds of tools cover almost everything. You probably already pay for the first one.

Warmup

Builds and keeps up each inbox’s reputation. Instantly, Smartlead and most sequencers include it; standalone warmup tools exist if yours does not.

Email warmup tools

Inbox placement tests

A cold email deliverability test: send your email to seed inboxes at Gmail, Outlook and others and see where it lands. Also called a cold email checker or spam test.

Deliverability testing tools

Email verification

Checks every address before you send, so bounces stay under 2%. Run it on every new list and again on any list older than 90 days.

Email verification tools

Two tools we see often in deliverability work are GlockApps for placement tests and MailReach for warmup and spam tests; our directory lists the rest with verified prices. Does the sequencer itself change deliverability, say Instantly against Apollo? Much less than people think. Every major tool sends through your inboxes, so the domains, the inboxes, the list and the copy decide where your email lands. Pick the sequencer for its rotation, warmup and reporting. To improve email deliverability, change the inputs: domains, inboxes, list and copy.

Myths

Six cold email deliverability myths that cost replies.

“Warmup keeps me out of spam”

Warmup gives a new inbox a fair start. A bad list, spam reports or spammy copy undo it within days.

“Delivered means it reached the inbox”

Delivered only means the server accepted it. Spam folders count as delivered.

“Avoid these 100 spam words”

Filters weigh your reputation and how people react far more than single words. Plain, honest copy matters; a word list does not.

“Open rates show my deliverability”

Apple Mail and some security tools open emails automatically. Use placement tests and reply rates.

“Aged domains skip warmup”

An old domain with no sending history is still new to Gmail and Outlook. It needs the same ramp.

“More inboxes on one domain is fine”

Ten inboxes on one domain put all their volume on one reputation. Two per domain, five at most.

Start with inboxes built for deliverability.

Steps one to three of the checklist, done for you. PureMail sets up Google Workspace and Microsoft 365 inboxes on your own domains from $2.90 an inbox a month: SPF, DKIM, DMARC and MX checked on every domain, a sender name on every inbox, and each one connected to your sequencer, in about four hours. Monthly billing, no setup fee.

FAQ

Cold email deliverability: questions, answered.

What senders ask us most when replies drop.

01

What is cold email deliverability?

Cold email deliverability is the share of your cold emails that land in the inbox, not in spam or promotions. It depends on your sending domains, DNS authentication (SPF, DKIM, DMARC), the inboxes you send from, warmup, daily volume per inbox, how clean your list is and how your copy reads. Good deliverability means most prospects actually see your email.

02

How do I improve email deliverability for cold email?

Send from separate domains with SPF, DKIM and DMARC set up, use Google Workspace or Microsoft 365 inboxes, warm each one up for two to three weeks and keep it to 20 to 40 emails a day. Verify every address, keep bounces under 2%, write short plain-text emails with no links in the first one, and check your spam rate every week.

03

Why did my cold email deliverability suddenly drop?

A sudden drop usually has one of four causes: a DNS change broke SPF, DKIM or DMARC; a domain was added to a blacklist; a campaign drew a burst of spam reports; or a bad list pushed bounces above 2%. Check a test email’s headers, run a blacklist check, look at Google Postmaster Tools and pause the campaign you launched most recently.

04

What ruins cold email deliverability the fastest?

Sending to a bad list. Hard bounces and spam traps show inbox providers that you do not know who you are emailing, and a single campaign with 10% bounces can undo weeks of warmup. Next come spam reports above 0.3%, full volume on new inboxes, broken authentication, and links or tracking in the first email.

05

Does Google or Outlook have better cold email deliverability?

Neither is better everywhere. Gmail filters Gmail and Google Workspace recipients, and Microsoft filters Outlook and Microsoft 365 recipients. Email from a Google Workspace inbox to a Gmail user, or from Microsoft 365 to an Outlook user, usually lands better. Check which provider your prospects use and send to each group from the matching inboxes.

06

Should the first cold email have no links?

Yes. Links, and tracked or shortened links most of all, are one of the most common reasons a first email from an unknown sender lands in spam. Keep the first email plain text with no links and no images, ask one question, and add a link in a follow-up once the person has replied or seen your name before.

07

Do role-based emails bounce more in cold email?

Yes. Addresses like info@, sales@ and support@ often go to shared inboxes, ticket systems or strict filters. They bounce more, more of them are spam traps, and the people who read them report spam more often, because nobody there asked to hear from you. Leave them out of first-touch sequences.

08

Can bad lead data ruin cold email deliverability?

Yes, faster than anything else. Old data is full of people who changed jobs, so their addresses bounce or become spam traps. Verification helps but misses catch-all domains, which accept every address, so a verifier cannot confirm the person exists. Re-verify lists older than 90 days and send to catch-alls in small batches.

09

How can I check the deliverability of an email?

Run an inbox placement test: send your email to a set of test inboxes at Gmail, Outlook and other providers, and see how many land in the inbox, spam or promotions. Also open one test email in Gmail, choose Show original and check for SPF, DKIM and DMARC passes. Then watch the reply rate per inbox.

10

Should I use a subdomain or a separate domain for cold email?

A separate lookalike domain, such as getacme.com. A subdomain like mail.acme.com still carries your main domain’s name, and a reputation problem on it can affect your company email. Separate domains keep cold email risk away from the domain your team, customers and invoices depend on. Two inboxes per domain is the usual setup.

11

Is cold email still effective in 2026?

Yes, for B2B outreach that is targeted and set up properly. The rules got stricter, so careless senders lose more than before, but a short, relevant email from a well-set-up inbox to the right person still gets replies. Hunter’s 2026 data shows reply rates of 4 to 7%, depending mostly on targeting and on not using open tracking.

12

What is a good email deliverability rate for cold email?

Aim for at least 90% of emails landing in the inbox in a placement test, a bounce rate under 2% and a spam complaint rate under 0.1% in Google Postmaster Tools. Email delivery rate, the share accepted by the receiving server, should be above 98%. Delivery only means accepted; deliverability means it reached the inbox.

Still have a question? support@puremail.ai · contact us

Your next reply is one order away.

Google Workspace and Microsoft 365 inboxes from $2.90 a month, set up and connected to your sequencer today.